Clearcoat – Tile Joint Sealant

Clear-coat -Tile Joint Sealant – Used in Terrace,Kitchen,Bathroom Tile Joints

Specifications:

• Appearance Clear, gloss finish
• Usage Bathroom Tiles Joints and Terrace Tiles Joint
• Suitable For Tiles, China Mosaic and Terrazzo Flooring, or previously coated concrete
• Properties Easy to apply, two-component clear Epoxy coat + Hardener in Clear coat – Tile Joint Sealant
• Surfaces Clean and Dry Surface Tiles, China Mosaic and Terrazzo Flooring
• Coverage Tiles and China Mosaic: approx.150 to 200 Running Feet. per kit.
• Complete Curing Time 24 to 48 hours at 30-40°C
• Pot Time (hours) 30 minutes

How to Stop Bathroom Leakage without Removing Floor Tiles?

Surface Preparation:

A surface needs to be properly prepared it should be Clean, Dry, and Dust-free.

Humidity:

Make sure that the surface is completely Dry. No pipes or Taps Dripping
No Rising humidity from beneath the ground.

All oils, greases, and residues must be properly cleaned before attempting
Waterseal  Clearcoat – Tile Joint Sealant

1. Make sure that the surface is completely dry. Clean the Surface thoroughly using a cloth. The surface should be free of dust, before application.
2. Use a Hand Scraper and remove old grouts(joints)in Tiles. So chemicals can be filled in it.

3. MOST IMPORTANT MIXING RATIO

   For Terrace Tile Joints: Mix WATERSEAL’S Clear-Coat (Part A- 50 ml+ Part B-50 ml) Ratio of 1:1  ( Flexible and Slow setting Coating for Open space)

   For Bathroom Tiles Joints (Part A- 50 ml+ Part B-25 ml) Ratio of 2:1. (Hard and dry Coating)

   use a 100 ml Measuring cup And fill the Mixture in Needle Container.

4. Fill the mixture into Joints In Needle Container Use the mixture in less than 30 minutes, or else it will start drying. Joints will take 4 to 6 Hours to semi Dry. After repeating the Same Procedure and Filling the All Joints
   2nd Time. Once all joints are filled up.
5. Fill the Big Crack & Joint Grooves with mixed filler using Putty-knife (4″ Hand Scraper)(1Part Clear coat mixer + 2 Part Crack Grouting Powder )Clean the Surface thoroughly using cloth. let the surface dry for at least 12-18 Hrs.
6. For better results: Coating all over the tiles with Paint Brush and Roller.
7. Warning: Never add the leftover mixture back to the chemical container else the chemicals will start drying. Store in a cool & well- ventilated Place.
8. Note: Contact us – at 9825585997 for a 10/20 Kg Packing of Clear Coat Commercial kit ( More Discounted Price )

READ OUR FULL DETAIL POST HERE