How to Waterproof an Old Building Terrace

Waterproof old building terrace is a tricky problem. mainly because the surfaces are Ruff and Cracked. This means that the water cannot run off the structure quickly, and will move slowly or pool above the surface, creating opportunities for leakage.

We Providing Waterproof old building Terrace

With Waterseal’s effective Silicone Polymer. Waterproofing Terrace  will be durable and damage free.

Leakage and seepage can be caused by improper slopes, clogged drainage pipes, cracks and damages on the terrace slab, resulting in standing water on the roof which leads to seepage and leakage on the floor below. Silicone coatings like Damp proof provide lamination to terrace and helps is resolving waterproofing issues.

A terrace with tiles or china chips has many joints. Improper filling of these joints and cracks in tiles may lead to waterproofing problems. For application of Damp proof above these chips, tile primer is required.

If at all you are planning to have a garden on your terrace, you need to have waterproofing done. Waterproofing can be easily be done by application of waterproofing polymer coating on concrete slab/surface. But this coating is done on concrete. Once a waterproof Silicone polymer coating is done.

Waterproof old building Terrace Method.

When it is intended to carry out the waterproofing of a newly built reinforced concrete roof, it is best to provide the waterproofing layer directly on the structural slab. The insulation layer and the finishing layer can then follow.

Washing the Roof-terrace surface and making it dust free.

  1.  Applying First coat for Filling the invisible cracks & small holes with diluted silicone By spray paint machine. .
  2.  Applying Second & Third coat of Silicone based cement waterproofing to strengthen the surface By Painting Brush.
  3.  Applying Final Forth Coat of Transparent Silicone by Roller OR Paint Sprayer.
  4. These advanced technology laden protection is very safe,maintenance free and cost effective…

Waterproofing Solutions: How to Waterproofing on old building Terrace

Old Terrace waterproofing
Play Video about Old Terrace waterproofing
  • Washing the Roof / terrace surface and making it dust free.
  • Filling all the visible cracks by way of specially prepared Silicone crack filler.
  • Applying First coat for Filling the invisible cracks & small holes with diluted silicone.
  • Applying Second & Third coat of Silicone based cement waterproofing to strengthen the surface.
  • Applying Final Forth Coat of Transparent Silicone by Roller.
PREPARATION & APPLICATION PROCEDURE
 This is a Water based  Silicone added with white cement in proper ratio.
 After applying all coatings on the surface, it will set within half an hour. The completely curing is needed for 24 hours to strengthen
 No Worries About Load of The Silicone Waterproofing. Only 2 to 3mm  layer thickness  to prevent water leakage from the applied surface.
 

There are no reviews yet.

Be the first to review “How to Waterproof an Old Building Terrace”

Your email address will not be published.

Quality
Price